Licensed and Insured Drying Contractors
Every contractor we refer is an independent local business that carries its own license and insurance. Many train to the IICRC S500 standard for water damage drying; ask your tech about their certifications.
24/7 Drying Line Open
Structural Drying in Lamar, CO
Once the puddles are mopped up, a house can look done while the studs, subfloor and drywall core are still soaked inside. Getting a structure truly dry is a numbers game, measured with meters and humidity readings rather than fingertips.
One call to our referral line puts you in touch with a licensed, insured independent drying contractor serving Lamar. Your tech sets dehumidifiers and air movers to a plan, logs readings every day and gives you a written estimate up front.
- Targets set from dry material in the same house
- Readings recorded on every monitoring visit
- Independent local techs with license and insurance
- Drying in place before tearing anything out
While the drying runs
- Keep all equipment running around the clock
- Keep windows and doors closed unless told otherwise
- Set the thermostat where the tech recommends
- Do not move air movers or dehumidifiers
Why callers use this line
Why Choose Our Specialized Structural Drying Network in Lamar, CO
Proper drying is part science and part routine: read the air, read the materials, adjust, and repeat until the numbers line up. This is what the independent drying techs in our network bring.
Upfront Written Drying Estimates
The estimate lists equipment counts, expected drying days and monitoring visits, so the bill is easy to follow. Daily logs back up each line for the adjuster.
Fast Response From Nearby Techs
Starting early often means drywall, baseboard and floors can be dried in place rather than replaced. Our dispatcher confirms a real arrival window with a nearby tech while you are on the line.
Meters, Thermal Cameras and Psychrometric Tools
Drying techs carry thermo-hygrometers to read temperature, relative humidity and grains per pound, plus pin and pinless meters for wood and drywall. Equipment ranges from LGR and desiccant dehumidifiers to wall cavity injection kits and hardwood floor drying mats.
What the meters show
Dry to the Touch Is Not Dry
Here is a call the dispatch desk gets every week: a leak was fixed, the wall looks fine, but a tech puts a meter on it and it reads high. Painted drywall dries at the face while the gypsum core and the stud behind it stay wet. Seal it up or push furniture against it, and mold can grow out of sight for weeks.
Drying techs set goals by reading the same material in a part of the house the water never touched. When the wet wall reads within range of that dry standard, it is dry; until then, the equipment keeps running.
Hardwood floors show the same problem in a different way. After a slow leak under a sink or dishwasher, the bottom of the boards takes on water and swells, so the edges rise and the floor cups. Sand it flat too early and it crowns once it dries. Drying mats and patient monitoring often let the boards settle back down.
The short version: dry, warm air draws water out of materials, dehumidifiers remove it from the air, and air movers sweep the surface so evaporation keeps going.
- Relative humidity is how full the air is relative to what it can hold at that temperature
- GPP is the actual weight of water vapor in the air, which is the number techs track day to day
- Vapor pressure moves moisture from wetter materials toward drier air
- Dew point tells the tech where condensation could form on cold slabs and outside walls
Where drying equipment goes
What a Drying Job Actually Covers
Techs start by rating the job Class 1 through 4, which sets how much dehumidification and airflow it takes.
Mapping Wet Areas Against Dry Readings
The tech maps the wet area with meters and a thermal camera, then takes readings on unaffected material to set the drying goal. Those readings get marked on a sketch so every visit checks the same spots.
Evaporation Classes 1 to 4
Class 1 is a small area with little absorption; Class 4 means dense materials like hardwood, plaster or concrete that hold water deep. The class drives how many dehumidifiers and air movers go in.
- Class 2: a full room, with water wicking a short way up the walls
- Class 3: wet ceilings, walls and floors from water coming from above
LGR and Desiccant Dehumidifiers
Low grain refrigerant (LGR) units pull moisture down to lower GPP than standard dehumidifiers, which suits most homes. Desiccant dehumidifiers handle cold rooms and deep-holding materials like concrete and wood floors better.
Wall Cavity Injection Drying
Instead of tearing out drywall, the tech can drill small holes at the base of the wall and push dry air into the cavity. It works well for clean water caught early, and the holes hide under the trim.
Saving Cupped Hardwood
Mats seal against the wood and draw moisture up through the boards and the subfloor below. The tech tracks readings on the boards against dry wood elsewhere until they match.
Daily Logs and Drying Charts
Each monitoring visit logs temperature, humidity and GPP in the affected area, outdoors and at the dehumidifier outlet, along with material readings. The chart proves to the adjuster that drying is on track and shows when it is complete.
From the first reading to the last
How Structural Drying Works, Step by Step
Call Dispatch and Describe What Got Wet
Tell the dispatcher what kind of water it was, how long ago it happened and which materials got wet. We connect you with the nearest independent drying tech and confirm an arrival window.
Tech Arrives and Takes First Readings
Your tech records indoor and outdoor air conditions and then maps moisture across walls, floors and ceilings. Readings on dry material in another room set the target.
Drying Plan and Written Estimate
After rating the loss by class, the tech sorts what dries in place from what must be removed and sizes the equipment to match. You get a written, line-itemed estimate before the machines start.
Daily Checks Until Dry, Then Sign-Off
The tech checks readings every day or so, moves or removes equipment as areas dry, and logs every visit. Once all readings match the dry standard, the gear is picked up and you sign off with the complete log for your claim.
What people told us after
What Callers Said About Their Drying Jobs
Our upstairs toilet leaked and the hallway wall looked completely fine a day later. I called the referral number to be safe, and the local contractor they put me through to found the wall was wet inside. The crew blew dry air into the wall through small holes behind the baseboard and showed me the numbers falling each visit.
A slow leak under our dishwasher made the kitchen oak floor cup. I figured we would need a new floor. The tech who came out set drying mats on it and checked it against the dry wood in the dining room every day. It flattened most of the way, and they told us honestly which boards would still need work.
Honestly, I was tempted to switch the fans off overnight because of the noise. My tech explained that turning them off lets the moisture rebound and costs you a day of drying. We kept them running and the job wrapped up in about four days.
Common drying questions
Straight Answers About Structural Drying
How long does structural drying take?
Most clean-water jobs dry in about three to five days, but dense materials like hardwood, plaster and concrete can take longer. The class of the loss, the outdoor humidity and how soon the equipment went in all affect the timing. Your tech can update the estimate as the daily readings come in.
Why do the drying machines have to run 24 hours a day?
The equipment keeps the air drier than the wet materials, which is what pulls moisture out of them. Once the machines stop, the air humidity climbs back up and the materials stop drying or soak some back in.
Can I turn the drying equipment off at night?
It is best not to. Turning the equipment off overnight usually adds days to the job. If noise is a real problem, ask your tech whether a unit can be repositioned; do not move or switch off machines on your own.
How do they know when the structure is completely dry?
The tech compares readings on the wet materials to readings on the same material in an unaffected part of the house, called the dry standard. When every logged point matches that standard, the drying goal is met. You get the daily log as proof for your records and your adjuster.
How much electricity do drying machines use?
A dehumidifier and several air movers running around the clock will raise the power bill for that period. Plenty of insurance carriers reimburse the extra electricity on covered claims, so ask your adjuster and save the bills. Your tech will spread the load across circuits so nothing trips.
Local drying coverage
Independent Drying Contractors Serving Lamar
Our network of independent drying techs covers houses, condos and small businesses all over Lamar.
Some callers reach us after another company dried the space and something still smells musty or reads wet. A second set of readings from an independent tech can tell you where things stand.
- Drywall and framing
- Hardwood floors
- Subfloors
- Older plaster
- Ceilings
Reach the drying line now
Describe the materials and timing, and we will match you with a nearby independent drying tech.
Call +1-877-637-9008Walls or Floors Still Damp? Call Now
In a few minutes with a meter, a tech can tell you whether the structure is actually dry. A single call matches you with a local independent drying contractor.
