Licensed and Insured Independent Pros
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
Carpet that squishes when you step on it means the pad is full, and no box fan is going to fix that. Real extraction gear pulls water out of carpet, pad and floor seams far faster than any fan can dry it.
Our referral line connects Alorton callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. You get a written quote before the extraction wand ever hits the carpet.

With extraction, the machine and the tool attachment do the heavy lifting, and the right combination saves days of drying.
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
The estimate spells out square footage extracted, pad removal if needed and any equipment left behind. Plenty of them work straight with your adjuster once a claim is open.
Carpet pad sitting in water begins to smell fast, which makes a quick response the whole ballgame. The dispatcher confirms an actual arrival window with a nearby crew before you hang up.
Crews bring truck-mounted units with far more vacuum lift than any rental, plus portable extractors for high-rise and tight units. Weighted and stand-on tools put a person's body weight on the carpet so water is squeezed out of the pad, not just the fibers.
Each gallon removed by the extractor is a gallon that never has to be evaporated and captured by a dehumidifier. Extraction removes water in liquid form, which is many times faster than turning it into vapor with air movers. Leave it out and the drying phase stretches for days.
A wet vac works on the surface fibers and has nowhere near the suction of a truck-mounted unit. It also never reaches the pad, and that is where most of the water is hiding. Folks run one all evening and still end up with carpet that squishes.
Take a refrigerator ice-maker line that leaked into wall-to-wall carpet overnight. Since the water is clean, the crew can often float the carpet, which means releasing it from the tack strip, removing the pad and extracting the carpet itself.
Laminate is trickier. In a rental apartment where water seeped under the planks, it hides in the foam underlayment and against the subfloor. Meters and specialty mats show how far it spread, and any planks with swollen edges usually have to come up.
Rule of thumb from the field: carpet in clean water can often be saved, but the pad underneath is usually thrown out and replaced. Pad is cheap; carpet is not.
Water category can also worsen with time. A clean leak that sits for a few days in warm weather starts to grow bacteria, and that changes what can be kept. It is one more reason to call for extraction right away.

Carpet, wood, laminate and upholstery all trap water in their own way, which is why the tool heads change room to room.

The crew makes slow overlapping passes with a weighted tool until the wand stops pulling water. Wet pad is usually cut out and bagged, then the carpet is relaid once dry.
With clean water, crews often float the carpet: release it from the strip and blow air under it to dry it in place. This saves the carpet and keeps it out of the dumpster.
Flat panels sealed to the floor pull water up through the seams and out of the boards under vacuum. Caught early, this can keep solid hardwood from cupping badly.
Water slips under click-lock planks and sits on the subfloor where you cannot see it. Crews read moisture across the floor, pull planks where it is wet and extract the subfloor directly.
Furniture and rugs get treated with smaller upholstery tools made for fabric. Wool and handmade rugs often go out to a rug plant for proper washing and drying.
After extraction, the tech checks readings across the floor and up the walls to see where water wicked. That map decides where drying equipment goes next.
Tell the dispatcher what got wet, what flooring you have and where the water came from. We route you to the nearest independent extraction crew and give you an arrival window.
The crew pulls up with a truck mount or portable extractor, wands, weighted tools and moisture meters.
First the tech identifies the water source and category, measures the wet area and decides what stays, then puts the quote in writing.
When the extraction is finished, you see the final readings, the drying setup and what was removed before you sign off.

The fridge ice-maker line let go overnight and the living room carpet was wet from the kitchen to the far wall. The contractor I was connected with pulled the pad, extracted the carpet with a stand-on tool and saved the carpet itself. No smell afterward, which I was worried about.
Water from the hall closet in my apartment ran under the laminate before I noticed. The crew my landlord and I were connected with found it with a meter, pulled the wet planks and extracted the subfloor.
I ran my wet vac for hours and the carpet was still squishy. The contractor showed up with a truck mount and got more out of that room in a few passes than I did all night.
Our dog knocked the line off the back of the washer and water ran under the hardwood in the hall before we got home. The crew from the referral service set vacuum mats across the wood and ran them for hours. The floor cupped a little and then flattened back out as it dried.
Usually, when the water was clean and the carpet was extracted within a day or so. The pad underneath is usually replaced because it holds water and odor.
If sewage or floodwater soaked it, the carpet generally has to go.
A shop vac only pulls from the surface and has a fraction of the lift of a professional truck mount. Most of the water sits in the pad and subfloor, which a wet vac cannot reach.
Pros use weighted tools that press water out of the pad while the extractor pulls it away.
Extraction itself often takes a few hours for a typical room or two. Drying afterward is a separate step that can take several days.
After checking the size of the wet area, the crew can tell you how long it should take.
It should not, as long as the wet pad comes out and the carpet is dried fast. A smell usually means water stayed in the pad or subfloor for too long.
You can ask the crew if an antimicrobial treatment makes sense for your floor.
Extraction physically pulls liquid water out of carpet, pad and floors with powerful vacuums and tools. Drying comes next, using dehumidifiers and air movers to remove the moisture that is left.
Good extraction makes drying much shorter.
Because the crews are based near Alorton, the extraction truck does not have far to travel.
For upper-floor apartments and condos, crews bring portable units since a truck hose will not reach. Single-family homes and storefronts are usually handled with a truck mount parked in the driveway or lot.

Call and we will connect you with a local extraction crew.
Call +1-877-637-9008Quick extraction saves carpet and shortens drying. Call now to reach a local crew.