Licensed and Insured Independent Pros
You are connected with an independent, locally owned outfit that holds its own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
Carpet that squishes when you step on it means the pad is full, and no box fan is going to fix that. Real extraction gear pulls water out of carpet, pad and floor seams far faster than any fan can dry it.
Our referral line connects Bartlett callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. The crew quotes the job in writing before the wand touches the floor.

Extraction is a pure equipment job: the power of the machine and the right tool head decide how much water comes out.
You are connected with an independent, locally owned outfit that holds its own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
The estimate spells out square footage extracted, pad removal if needed and any equipment left behind. Many contractors bill the insurer directly once you have a claim number.
Wet pad starts to sour within a day or two, so speed matters more here than almost anywhere. The dispatcher confirms an actual arrival window with a nearby crew before you hang up.
Crews bring truck-mounted units with far more vacuum lift than any rental, plus portable extractors for high-rise and tight units. Stand-on and weighted tools press body weight into the carpet so the pad gives up its water, not only the top fibers.
Each gallon removed by the extractor is a gallon that never has to be evaporated and captured by a dehumidifier. Extraction removes water in liquid form, which is many times faster than turning it into vapor with air movers. Skip that step and the drying phase drags on for days longer than it needs to.
A shop vac falls short because it only pulls from the surface and has a fraction of the lift of a truck mount. It also cannot reach the pad, which is where most of the water sits. People run one for hours and still have carpet that squishes.
Think about an ice-maker line behind the fridge that leaked into the living room carpet overnight. That is clean water, so the crew may float the carpet: lift it off the tack strip, pull the soaked pad, extract the carpet in place and set drying underneath it.
Laminate is a tougher case: when water runs under the planks in a rental unit, it sits in the underlayment where you cannot see it. Meters and specialty mats show how far it spread, and any planks with swollen edges usually have to come up.
Rule of thumb from the field: carpet in clean water can often be saved, but the pad underneath is usually thrown out and replaced. Pad is cheap; carpet is not.
Water category can also worsen with time. A clean leak that sits for a few days in warm weather starts to grow bacteria, and that changes what can be kept. That is one more reason to get the extractor in early.

Each material holds water differently, so each one gets a different tool and technique.

Slow, overlapping passes with a weighted head continue until the clear wand shows almost no water. The soaked pad is typically cut out and removed, with the carpet reinstalled after drying.
With clean water, crews often float the carpet: release it from the strip and blow air under it to dry it in place. It keeps a perfectly good carpet from going to the landfill.
Flat panels sealed to the floor pull water up through the seams and out of the boards under vacuum. Caught early, this can keep solid hardwood from cupping badly.
Water slips under click-lock planks and sits on the subfloor where you cannot see it. The crew maps the wet area with a meter, lifts planks where needed and extracts the subfloor below.
Sofas, chairs and rugs get extracted with smaller hand tools sized for fabric. Wool and handmade rugs often go out to a rug plant for proper washing and drying.
Once the water is out, the tech maps moisture across the floor and along the base of the walls. Those readings tell the crew where the drying equipment should go.
Let the dispatcher know the flooring type, the size of the wet area and the source of the leak. We route you to the nearest independent extraction crew and give you an arrival window.
Expect extractors, tool heads, meters and hoses, plus a portable unit if you live upstairs.
First the tech identifies the water source and category, measures the wet area and decides what stays, then puts the quote in writing.
After extraction, the tech takes final readings, sets drying equipment if needed and walks you through what was done.

The fridge ice-maker line let go overnight and the living room carpet was wet from the kitchen to the far wall. The contractor I was connected with pulled the pad, extracted the carpet with a stand-on tool and saved the carpet itself. There was no musty smell later, which was my biggest worry.
Water from the hall closet in my apartment ran under the laminate before I noticed. Through the referral line we got a crew that metered the floor, lifted the soaked planks and extracted the subfloor.
I spent three hours with my shop vac and the carpet still squished. The contractor showed up with a truck mount and got more out of that room in a few passes than I did all night.
The washer drain hose came loose and water ran under the hallway hardwood while we were at work. The contractor we reached through the referral line laid suction mats over the boards and ran them for most of the day. The floor cupped a little and then flattened back out as it dried.
Usually, when the water was clean and the carpet was extracted within a day or so. The pad below is normally thrown out, since it traps water and smell.
Carpet soaked by sewage or outside floodwater is almost always removed.
Wet vacs grab surface water but lack the suction to pull water out of the pad. Most of the water sits in the pad and subfloor, which a wet vac cannot reach.
Pros use weighted tools that press water out of the pad while the extractor pulls it away.
Extraction itself often takes a few hours for a typical room or two. Drying afterward is a separate step that can take several days.
After checking the size of the wet area, the crew can tell you how long it should take.
It should not, as long as the wet pad comes out and the carpet is dried fast. A smell usually means water stayed in the pad or subfloor for too long.
Ask the crew whether an antimicrobial treatment is recommended for your situation.
Extraction physically pulls liquid water out of carpet, pad and floors with powerful vacuums and tools. Drying comes next, using dehumidifiers and air movers to remove the moisture that is left.
Good extraction makes drying much shorter.
The extraction contractors we refer are local, so the truck mount is not hours away.
For upper-floor apartments and condos, crews bring portable units since a truck hose will not reach. Single-family homes and storefronts are usually handled with a truck mount parked in the driveway or lot.

A dispatcher will route you to a nearby extraction crew.
Call +1-877-637-9008Quick extraction saves carpet and shortens drying. Call now to reach a local crew.