Licensed and Insured Independent Pros
You are connected with an independent, locally owned outfit that holds its own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
If water beads up when you press on the carpet, the pad underneath is soaked and evaporation alone will be painfully slow. A proper extractor physically pulls that water out of carpet and pad, which is much faster than waiting for it to evaporate.
Our referral line connects Selden callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. The crew quotes the job in writing before the wand touches the floor.

Extraction is a pure equipment job: the power of the machine and the right tool head decide how much water comes out.
You are connected with an independent, locally owned outfit that holds its own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
Expect a written estimate listing square feet of carpet extracted, any pad disposal and equipment rental days. Many contractors bill the insurer directly once you have a claim number.
Wet pad starts to sour within a day or two, so speed matters more here than almost anywhere. Our dispatcher confirms a real arrival window with a crew near Selden while you are on the phone.
Expect a truck-mounted extractor with serious vacuum lift, and portable units for upper floors and apartments. Stand-on and weighted tools press body weight into the carpet so the pad gives up its water, not only the top fibers.
Every gallon the extractor pulls out is a gallon the dehumidifiers never have to deal with. Extraction removes water in liquid form, which is many times faster than turning it into vapor with air movers. Skip that step and the drying phase drags on for days longer than it needs to.
A shop vac falls short because it only pulls from the surface and has a fraction of the lift of a truck mount. It also cannot reach the pad, which is where most of the water sits. Folks run one all evening and still end up with carpet that squishes.
Think about an ice-maker line behind the fridge that leaked into the living room carpet overnight. Since the water is clean, the crew can often float the carpet, which means releasing it from the tack strip, removing the pad and extracting the carpet itself.
Laminate is a tougher case: when water runs under the planks in a rental unit, it sits in the underlayment where you cannot see it. Meters and specialty mats show how far it spread, and any planks with swollen edges usually have to come up.
Field rule: clean-water carpet is often saved, while the pad below is usually tossed. Pad costs little to replace compared to carpet.
Time matters too: clean water left sitting for days in a warm house picks up bacteria, which shrinks the list of what can be saved. That is one more reason to get the extractor in early.

Carpet, wood, laminate and upholstery all trap water in their own way, which is why the tool heads change room to room.

The crew makes slow overlapping passes with a weighted tool until the wand stops pulling water. The soaked pad is typically cut out and removed, with the carpet reinstalled after drying.
With clean water, crews often float the carpet: release it from the strip and blow air under it to dry it in place. This saves the carpet and keeps it out of the dumpster.
Flat panels sealed to the floor pull water up through the seams and out of the boards under vacuum. When caught early, it often stops solid hardwood from cupping.
With click-together planks, water runs underneath and pools on the subfloor out of sight. The crew maps the wet area with a meter, lifts planks where needed and extracts the subfloor below.
Sofas, chairs and rugs get extracted with smaller hand tools sized for fabric. Wool and handmade rugs usually get sent to a rug cleaning plant for full washing.
After extraction, the tech checks readings across the floor and up the walls to see where water wicked. That map decides where drying equipment goes next.
Let the dispatcher know the flooring type, the size of the wet area and the source of the leak. We connect you with the closest independent extraction crew and confirm when they will arrive.
The crew pulls up with a truck mount or portable extractor, wands, weighted tools and moisture meters.
First the tech identifies the water source and category, measures the wet area and decides what stays, then puts the quote in writing.
When the extraction is finished, you see the final readings, the drying setup and what was removed before you sign off.

The fridge ice-maker line let go overnight and the living room carpet was wet from the kitchen to the far wall. The local contractor from the referral line pulled the wet pad, stood on some kind of weighted tool for an hour and kept our carpet. No smell afterward, which I was worried about.
Water from the hall closet in my apartment ran under the laminate before I noticed. The crew my landlord and I were connected with found it with a meter, pulled the wet planks and extracted the subfloor.
I ran my wet vac for hours and the carpet was still squishy. The extractor the contractor brought pulled more water in a few minutes than I got in an evening.
The washer drain hose came loose and water ran under the hallway hardwood while we were at work. The contractor we reached through the referral line laid suction mats over the boards and ran them for most of the day. The floor cupped a little and then flattened back out as it dried.
Often, if it got wet from a clean source like a supply line or ice-maker and is extracted quickly. The pad below is normally thrown out, since it traps water and smell.
If sewage or floodwater soaked it, the carpet generally has to go.
A shop vac only pulls from the surface and has a fraction of the lift of a professional truck mount. Most of the water sits in the pad and subfloor, which a wet vac cannot reach.
Pros use weighted tools that press water out of the pad while the extractor pulls it away.
For one or two rooms, the extraction often wraps up in a few hours. The drying that follows is a separate step and usually runs a few days.
The crew will give you a time estimate after looking at the wet area.
It should not, as long as the wet pad comes out and the carpet is dried fast. A smell usually means water stayed in the pad or subfloor for too long.
You can ask the crew if an antimicrobial treatment makes sense for your floor.
Extraction physically pulls liquid water out of carpet, pad and floors with powerful vacuums and tools. Drying is what follows, with dehumidifiers and air movers removing what is left behind.
The better the extraction, the shorter the drying phase.
The extraction contractors we refer are local, so the truck mount is not hours away.
Upstairs condos and apartments often need portable extractors because hoses cannot reach from the street. Houses and small storefronts usually get a truck mount parked right outside.

A dispatcher will route you to a nearby extraction crew.
Call +1-877-637-9008The faster the pad and carpet are extracted, the more you save. Call now for a local crew.