Licensed and Insured Independent Pros
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
When carpet squishes under your shoes, the pad below is holding gallons, and fans alone will take ages to pull it out. A proper extractor physically pulls that water out of carpet and pad, which is much faster than waiting for it to evaporate.
Our referral line connects Richfield callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. The crew quotes the job in writing before the wand touches the floor.

Extraction is a pure equipment job: the power of the machine and the right tool head decide how much water comes out.
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask at the door if you want to see the paperwork; good crews keep it in the truck.
Expect a written estimate listing square feet of carpet extracted, any pad disposal and equipment rental days. Plenty of them work straight with your adjuster once a claim is open.
Wet pad starts to sour within a day or two, so speed matters more here than almost anywhere. Our dispatcher confirms a real arrival window with a crew near Richfield while you are on the phone.
Expect a truck-mounted extractor with serious vacuum lift, and portable units for upper floors and apartments. Weighted and stand-on tools put a person's body weight on the carpet so water is squeezed out of the pad, not just the fibers.
Each gallon removed by the extractor is a gallon that never has to be evaporated and captured by a dehumidifier. Extraction removes water in liquid form, which is many times faster than turning it into vapor with air movers. Leave it out and the drying phase stretches for days.
A wet vac works on the surface fibers and has nowhere near the suction of a truck-mounted unit. It also cannot reach the pad, which is where most of the water sits. Folks run one all evening and still end up with carpet that squishes.
Take a refrigerator ice-maker line that leaked into wall-to-wall carpet overnight. Since the water is clean, the crew can often float the carpet, which means releasing it from the tack strip, removing the pad and extracting the carpet itself.
Laminate is a tougher case: when water runs under the planks in a rental unit, it sits in the underlayment where you cannot see it. Extraction mats and meters show how far it traveled, and swollen boards usually come up.
Field rule: clean-water carpet is often saved, while the pad below is usually tossed. Pad costs little to replace compared to carpet.
Water category can also worsen with time. A clean leak that sits for a few days in warm weather starts to grow bacteria, and that changes what can be kept. That is one more reason to get the extractor in early.

Each material holds water differently, so each one gets a different tool and technique.

The crew makes slow overlapping passes with a weighted tool until the wand stops pulling water. The soaked pad is typically cut out and removed, with the carpet reinstalled after drying.
For a clean-water leak, the crew can pull the carpet off the tack strip, slide air underneath and dry it in place. This saves the carpet and keeps it out of the dumpster.
Panel mats seal against the wood and draw water up from between the boards and out of the subfloor. When caught early, it often stops solid hardwood from cupping.
With click-together planks, water runs underneath and pools on the subfloor out of sight. Crews read moisture across the floor, pull planks where it is wet and extract the subfloor directly.
Furniture and rugs get treated with smaller upholstery tools made for fabric. Wool and handmade rugs often go out to a rug plant for proper washing and drying.
Once the water is out, the tech maps moisture across the floor and along the base of the walls. Those readings tell the crew where the drying equipment should go.
Let the dispatcher know the flooring type, the size of the wet area and the source of the leak. We route you to the nearest independent extraction crew and give you an arrival window.
The crew pulls up with a truck mount or portable extractor, wands, weighted tools and moisture meters.
First the tech identifies the water source and category, measures the wet area and decides what stays, then puts the quote in writing.
After extraction, the tech takes final readings, sets drying equipment if needed and walks you through what was done.

The fridge ice-maker line let go overnight and the living room carpet was wet from the kitchen to the far wall. The contractor I was connected with pulled the pad, extracted the carpet with a stand-on tool and saved the carpet itself. No smell afterward, which I was worried about.
Water from the hall closet in my apartment ran under the laminate before I noticed. The crew my landlord and I were connected with found it with a meter, pulled the wet planks and extracted the subfloor.
I ran my wet vac for hours and the carpet was still squishy. The contractor showed up with a truck mount and got more out of that room in a few passes than I did all night.
Our dog knocked the line off the back of the washer and water ran under the hardwood in the hall before we got home. The crew from the referral service set vacuum mats across the wood and ran them for hours. The floor cupped a little and then flattened back out as it dried.
Often, if it got wet from a clean source like a supply line or ice-maker and is extracted quickly. The pad below is normally thrown out, since it traps water and smell.
If sewage or floodwater soaked it, the carpet generally has to go.
A shop vac only pulls from the surface and has a fraction of the lift of a professional truck mount. Most of the water sits in the pad and subfloor, which a wet vac cannot reach.
Pros use weighted tools that press water out of the pad while the extractor pulls it away.
Extraction itself often takes a few hours for a typical room or two. The drying that follows is a separate step and usually runs a few days.
After checking the size of the wet area, the crew can tell you how long it should take.
It should not, as long as the wet pad comes out and the carpet is dried fast. Odor usually means water was left in the pad or subfloor too long.
You can ask the crew if an antimicrobial treatment makes sense for your floor.
Extraction physically pulls liquid water out of carpet, pad and floors with powerful vacuums and tools. Drying comes next, using dehumidifiers and air movers to remove the moisture that is left.
Good extraction makes drying much shorter.
The extraction contractors we refer are local, so the truck mount is not hours away.
For upper-floor apartments and condos, crews bring portable units since a truck hose will not reach. Single-family homes and storefronts are usually handled with a truck mount parked in the driveway or lot.

Call and we will connect you with a local extraction crew.
Call +1-877-637-9008The faster the pad and carpet are extracted, the more you save. Call now for a local crew.