Licensed and Insured Independent Pros
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
When carpet squishes under your shoes, the pad below is holding gallons, and fans alone will take ages to pull it out. A proper extractor physically pulls that water out of carpet and pad, which is much faster than waiting for it to evaporate.
Our referral line connects Compo callers with independent, licensed and insured contractors who run truck-mounted and portable extractors. The crew quotes the job in writing before the wand touches the floor.

Extraction is a pure equipment job: the power of the machine and the right tool head decide how much water comes out.
Extraction contractors we refer are independent local businesses that carry their own license and insurance. Ask to see proof of insurance on arrival, and a reputable crew will have it handy.
Expect a written estimate listing square feet of carpet extracted, any pad disposal and equipment rental days. Plenty of them work straight with your adjuster once a claim is open.
Wet pad starts to sour within a day or two, so speed matters more here than almost anywhere. The dispatcher confirms an actual arrival window with a nearby crew before you hang up.
Crews bring truck-mounted units with far more vacuum lift than any rental, plus portable extractors for high-rise and tight units. Stand-on and weighted tools press body weight into the carpet so the pad gives up its water, not only the top fibers.
Each gallon removed by the extractor is a gallon that never has to be evaporated and captured by a dehumidifier. Extraction removes water in liquid form, which is many times faster than turning it into vapor with air movers. Skip that step and the drying phase drags on for days longer than it needs to.
A shop vac falls short because it only pulls from the surface and has a fraction of the lift of a truck mount. It also cannot reach the pad, which is where most of the water sits. People run one for hours and still have carpet that squishes.
Think about an ice-maker line behind the fridge that leaked into the living room carpet overnight. That is clean water, so the crew may float the carpet: lift it off the tack strip, pull the soaked pad, extract the carpet in place and set drying underneath it.
Laminate is trickier. In a rental apartment where water seeped under the planks, it hides in the foam underlayment and against the subfloor. Extraction mats and meters show how far it traveled, and swollen boards usually come up.
Field rule: clean-water carpet is often saved, while the pad below is usually tossed. Pad costs little to replace compared to carpet.
Time matters too: clean water left sitting for days in a warm house picks up bacteria, which shrinks the list of what can be saved. That is one more reason to get the extractor in early.

Carpet, wood, laminate and upholstery all trap water in their own way, which is why the tool heads change room to room.

Slow, overlapping passes with a weighted head continue until the clear wand shows almost no water. Wet pad is usually cut out and bagged, then the carpet is relaid once dry.
For a clean-water leak, the crew can pull the carpet off the tack strip, slide air underneath and dry it in place. It keeps a perfectly good carpet from going to the landfill.
Flat panels sealed to the floor pull water up through the seams and out of the boards under vacuum. Caught early, this can keep solid hardwood from cupping badly.
With click-together planks, water runs underneath and pools on the subfloor out of sight. Crews read moisture across the floor, pull planks where it is wet and extract the subfloor directly.
Furniture and rugs get treated with smaller upholstery tools made for fabric. Wool and handmade rugs often go out to a rug plant for proper washing and drying.
After extraction, the tech checks readings across the floor and up the walls to see where water wicked. Those readings tell the crew where the drying equipment should go.
Let the dispatcher know the flooring type, the size of the wet area and the source of the leak. We connect you with the closest independent extraction crew and confirm when they will arrive.
Expect extractors, tool heads, meters and hoses, plus a portable unit if you live upstairs.
First the tech identifies the water source and category, measures the wet area and decides what stays, then puts the quote in writing.
When the extraction is finished, you see the final readings, the drying setup and what was removed before you sign off.

The fridge ice-maker line let go overnight and the living room carpet was wet from the kitchen to the far wall. The contractor I was connected with pulled the pad, extracted the carpet with a stand-on tool and saved the carpet itself. No smell afterward, which I was worried about.
I rent an apartment and water came in under the laminate from the unit's water heater closet. The crew my landlord and I were connected with found it with a meter, pulled the wet planks and extracted the subfloor.
I ran my wet vac for hours and the carpet was still squishy. The contractor showed up with a truck mount and got more out of that room in a few passes than I did all night.
Our dog knocked the line off the back of the washer and water ran under the hardwood in the hall before we got home. The crew from the referral service set vacuum mats across the wood and ran them for hours. The boards cupped slightly, then settled flat again once everything was dry.
Usually, when the water was clean and the carpet was extracted within a day or so. The pad below is normally thrown out, since it traps water and smell.
Carpet soaked by sewage or outside floodwater is almost always removed.
Wet vacs grab surface water but lack the suction to pull water out of the pad. The pad and subfloor are where most water lives, and a wet vac does not get there.
Professional crews pair a powerful extractor with weighted tools that squeeze the pad.
For one or two rooms, the extraction often wraps up in a few hours. Drying afterward is a separate step that can take several days.
After checking the size of the wet area, the crew can tell you how long it should take.
Not if the pad is removed, the carpet is extracted thoroughly and it dries quickly. A smell usually means water stayed in the pad or subfloor for too long.
You can ask the crew if an antimicrobial treatment makes sense for your floor.
Extraction is the vacuum step that removes liquid water from carpet, pad and flooring. Drying comes next, using dehumidifiers and air movers to remove the moisture that is left.
Good extraction makes drying much shorter.
The extraction contractors we refer are local, so the truck mount is not hours away.
For upper-floor apartments and condos, crews bring portable units since a truck hose will not reach. Single-family homes and storefronts are usually handled with a truck mount parked in the driveway or lot.

A dispatcher will route you to a nearby extraction crew.
Call +1-877-637-9008Quick extraction saves carpet and shortens drying. Call now to reach a local crew.